Standard Solenoid Valve

XHnotion Solenoid valve is used for the fluid control of air, water, oil or gas. It usually consists of an operator and valve body. The operator includes the coil (solenoid), core (armature), core tube, shading coil and spring. When an electrical current passes through the solenoid, a magnetic field is created which pulls the core into the open or closed position.

XHnotion Standard Solenoid Valve includes direct acting solenoid valve, pilot solenoid valve, stainless steel solenoid valve, brass solenoid valve, plastic solenoid valve. They can be use for water, air, oil, etc.

Normally Closed Solenoid Valve
In the Normally Closed (NC) operation, the coil is de-energized to shut off the fluid and it is energized to let the fluid flow through.

Normally Open Solenoid Valve
Then there is the Normally Open (NO) operation in which the fluid flows when the coil is de-energized and is cut off when the coil is energized.

2N series ————Direct acting membrane solenoid valve, IP65 coil, CE certificated, DIN connector, multiple voltage available. 0-10 bar, 1/8”-2”, NC and NO is available.

2W series ————Direct acting membrane solenoid valve, IP54 coil, CE certificated, lead wire, multiple voltage available. 0-10 bar, 1/8”-2”, NC and NO is available.

XP series ————Pilot operated membrane solenoid valve, IP65 coil, CE certificated, DIN connector, multiple voltage available. 0.5-16 bar, 1/8”-2”, NC and NO is available.

XLA series ————Pilot operated piston solenoid valve, IP65 coil, CE certificated, DIN connector, multiple voltage available. 0.5-25 bar, 1/8”-2”, NC and NO is available. The valve can be applied for steam.

B series————— can replace BURKERT solenoid valve

Custom solenoid valve, please email to sales@xhnotion.com